Every SoM comes with a makeshift Linux system. Every manufacturer must add OTA updates, security measures, remote access, GUI frameworks and more. That's a lot of duplicated work. This would be much more efficient, if a SoM maker provides a Linux with all the features ready for use by manufacturers. Toradex does this with Torizon. We show how manufacturers can benefit from this groundwork with minimal effort. Torizon even runs on non-Toradex SoMs. SoM = Solutions on Module.
We want to develop the Internet radio application for the Raspberry Pi in the same way as for a PC. We change the source code in QtCreator and run the application. QtCreator cross-builds the application on the PC for the
In Part 1 of the series on Qt Embedded Systems, we build a custom Linux image with Yocto for the Raspberry Pi 3B. When we power on the embedded device, it starts an Internet radio application - called Cuteradio. This
From Qt 5.15, The Qt Company make their offering a bit more inconvenient for FOSS users. They announced three changes: * A Qt account is mandatory to download binary Qt packages. The offline installer is not available to FOSS users
In the early days of controller area networks (CAN), every device manufacturer interpreted CAN frames in its own proprietary way. When you changed the engine of a harvester from Volvo to MAN, you would have to reimplement the communication with
Controller Area Networks (CANs, for short) are used for the communication between electronic control units (ECUs) in cars, trucks, tractors, harvesters, construction machines, packaging lines and e-bikes. Qt provides the Qt CAN Bus API as part of its QtSerialBus module.
We want to build a custom Linux image with Yocto for the Raspberry Pi 3 model B (BCM2837). The Linux image contains a very simple Internet radio application using Qt 5.11 and the eglfs graphics backend. Our colleagues shall
We must figure out why a Yocto package doesn't work as expected. So, we must tweak the source code a bit here and there, cross-build the package for our ARM-based embedded Linux system and install some shared libraries
We have succeeded in building embedded Linux with Yocto for a quad-core NXP i.MX6 (ARM Cortex-A9). Next, we want to cross-compile our own Qt application. As we use CMake for building our Qt application, we must create a CMake
The maize harvest is in full swing. The harvester runs nearly 24/7. The driver notices a drop in the area cut per hour. He calls tech support and starts sharing the screen of the terminal in the harvester. The
Recently, I brought up Qt 5.5 on a Freescale i.MX35, which has an ARM11 CPU but no OpenGL support. Despite the missing OpenGL, I wanted to write the HMI with QML. The additional challenge was that the cross-compilation